Post by JohnWickHitman on Oct 7, 2020 17:04:02 GMT -6
If you want to stand up the PS5, it has a fairly narrow base in that orientation, and if you want to lay it down on its side, well, both of the console’s side panels are curved. As such, Sony is including a stand in the box with the standard PS5 as well as the discless Digital Edition. It’s a single unit that functions as both a vertical stand and a horizontal stand — but that’s just where its ingenious design begins.
The PS5 stand is a disc-shaped unit with a clawlike protrusion. When you want to stand up the console, you use a single flathead screw to secure the stand to the bottom of the unit; the claws fit nicely into a recessed area on the back of the console. When you want to lay the console down horizontally, you remove the stand from the bottom of the PS5, and simply use the claws to clip it onto the back. The claws rest right by the two USB 3.0 slots in the console’s rear port array, with the stand itself sitting beneath the system to, y’know, hold it up.
An astute observer might realize that this design presents a problem: namely, what to do with the screw, since it’s not used when the stand is holding up a horizontal PS5. Well, Sony figured out an elegant solution for this issue!
Sony built a special compartment for just this purpose into the underside of the stand. When you’re not using the screw, you can just snap it in there. Sony even thought of the fact that in the horizontal orientation, the screw hole would be visible on the left side of the PS5. So the underside chamber also holds a piece of plastic that you can use to plug the screw hole (which makes it even harder to notice the already inconspicuous hole).
And don’t worry about the screw falling out of the stand. When you want to transition from vertical to horizontal, you rotate the top of the stand to close the compartment, locking the screw inside.
I’m fascinated by all the engineering effort that clearly went into this inventive piece of the PS5 puzzle. Assuming that all of the stand’s components hold up over time, this is a smart design that provides both a functional and clever solution for the challenges created by the unique exterior shell of the PS5. The jury is out on whether the PS5 will deliver the future of gaming, but one thing seems sure already: It’s the next generation of industrial design.
The PS5 stand is a disc-shaped unit with a clawlike protrusion. When you want to stand up the console, you use a single flathead screw to secure the stand to the bottom of the unit; the claws fit nicely into a recessed area on the back of the console. When you want to lay the console down horizontally, you remove the stand from the bottom of the PS5, and simply use the claws to clip it onto the back. The claws rest right by the two USB 3.0 slots in the console’s rear port array, with the stand itself sitting beneath the system to, y’know, hold it up.
An astute observer might realize that this design presents a problem: namely, what to do with the screw, since it’s not used when the stand is holding up a horizontal PS5. Well, Sony figured out an elegant solution for this issue!
Sony built a special compartment for just this purpose into the underside of the stand. When you’re not using the screw, you can just snap it in there. Sony even thought of the fact that in the horizontal orientation, the screw hole would be visible on the left side of the PS5. So the underside chamber also holds a piece of plastic that you can use to plug the screw hole (which makes it even harder to notice the already inconspicuous hole).
And don’t worry about the screw falling out of the stand. When you want to transition from vertical to horizontal, you rotate the top of the stand to close the compartment, locking the screw inside.
I’m fascinated by all the engineering effort that clearly went into this inventive piece of the PS5 puzzle. Assuming that all of the stand’s components hold up over time, this is a smart design that provides both a functional and clever solution for the challenges created by the unique exterior shell of the PS5. The jury is out on whether the PS5 will deliver the future of gaming, but one thing seems sure already: It’s the next generation of industrial design.
Original @ Polygon....quoted...
Video Of Stand In Action